Comments on: Install AdvancedTomato on the Linksys E2500 v3 https://blog.adriel.co.nz/2016/04/13/install-advancedtomato-on-the-linksys-e2500-v3/ Occasionally I think of things to write about. Thu, 11 Oct 2018 20:47:00 +0000 hourly 1 https://wordpress.org/?v=6.0 By: Bruce Benson https://blog.adriel.co.nz/2016/04/13/install-advancedtomato-on-the-linksys-e2500-v3/#comment-175 Thu, 11 Oct 2018 20:47:00 +0000 https://adriel.co.nz/blog/?p=36#comment-175 Worked perfectly with my E2500 V3 (Tomato Firmware 1.28.0000 MIPSR2-3.5-140 K26 USB Mega-VPN). Used as a wireless access point. Thanks.

]]> By: Adriel https://blog.adriel.co.nz/2016/04/13/install-advancedtomato-on-the-linksys-e2500-v3/#comment-164 Sun, 13 May 2018 04:52:00 +0000 https://adriel.co.nz/blog/?p=36#comment-164 In reply to Allan Lopes Peretti.

Good to hear, thanks for leaving a comment!

]]> By: Allan Lopes Peretti https://blog.adriel.co.nz/2016/04/13/install-advancedtomato-on-the-linksys-e2500-v3/#comment-163 Sun, 13 May 2018 04:24:00 +0000 https://adriel.co.nz/blog/?p=36#comment-163 Worked just great, mate.
Configured as Wireless bridge.

]]> By: Adriel https://blog.adriel.co.nz/2016/04/13/install-advancedtomato-on-the-linksys-e2500-v3/#comment-123 Fri, 14 Jul 2017 02:52:00 +0000 https://adriel.co.nz/blog/?p=36#comment-123 In reply to vholkano.

Do you get anything showing up under WAN in the Status -> Overview section?
Also check your settings in Basic Settings -> Network, specifically the WAN Settings sections.

]]> By: vholkano https://blog.adriel.co.nz/2016/04/13/install-advancedtomato-on-the-linksys-e2500-v3/#comment-122 Thu, 13 Jul 2017 11:36:00 +0000 https://adriel.co.nz/blog/?p=36#comment-122 Hi, I installed but I have no internet access. Any clues? Thanks in advance.

]]> By: adriel https://blog.adriel.co.nz/2016/04/13/install-advancedtomato-on-the-linksys-e2500-v3/#comment-74 Sat, 05 Nov 2016 20:33:50 +0000 https://adriel.co.nz/blog/?p=36#comment-74 In reply to Bruce.

Excelent, glad it helped.

]]> By: Bruce https://blog.adriel.co.nz/2016/04/13/install-advancedtomato-on-the-linksys-e2500-v3/#comment-57 Sat, 20 Aug 2016 02:49:24 +0000 https://adriel.co.nz/blog/?p=36#comment-57 Perfect. Good summary. Worked the first time :-).

]]> By: adriel https://blog.adriel.co.nz/2016/04/13/install-advancedtomato-on-the-linksys-e2500-v3/#comment-34 Mon, 23 May 2016 08:44:50 +0000 https://adriel.co.nz/blog/?p=36#comment-34 My internet is about 10/1 so I can’t really test this until I get my fibre later on this month (hopefully).

Did you test the wifi speed before putting AdvacnedTomato on it?

]]> By: gerard https://blog.adriel.co.nz/2016/04/13/install-advancedtomato-on-the-linksys-e2500-v3/#comment-33 Sat, 21 May 2016 11:26:59 +0000 https://adriel.co.nz/blog/?p=36#comment-33 hi, i did the same thing. Router is working, ethernet ports are ok but wireless is not very stable.
I have 75 / 75 Mbps access, max speed for wireless is 10-20 Mbps, also nearby the router. Ethernet gives the full 75/75.
Any suggestions ?

]]>